4.4.7. Clock settings
To carry out clock settings, press the "SET" button
until viewing the "CLOCK SETTING" caption.
WARNING
The display modes may be changed or set
when the engine is off, the gear in neutral,
the motorbike stationary with your feet on
the ground. Do not change the display while
driving.
Press the "OK" button for less than three seconds;
the hour digit begins to flash.
By pressing the "OK" button again for less than
three seconds, the hour digit is increased by going to
the following numeric value.
Press the "OK" button for over three seconds; the
selected hour digit is confirmed. If instead one press-
es the "SET" button for less than three seconds the
setting procedure is interrupted.
OPERATION
- 59 -
4
4