cecotec ENERGYSILENCE AERO 4600 HELICOPTER Manual De Instrucciones página 47

Assembling the fixing frame and propeller to the rear of the helicopter
Figure 7
1. Fixing frame
2. Fixing frame gasket
3. Fixing nut
4. Fixing frame installation hole
5. LED light
6. Fixed decorative head
7. Propeller
8. Limiting tab
9. Limiting sleeve
10. Fixed toothed tube
11. Limiting slots
- Place the fixing frame in the corresponding hole and secure it with the gasket and nut.
Follow the same process for both fixing frames.
- Insert the sleeve into the tube at the rear of the helicopter. Then, insert the tabs into the
slots. Finally, fix it all together with the decorative head.
Hanging the fan
Figure 8
1. Mounting bracket
2. Fixing nut
3. Fixing screws
Figure 9
1. Connecting bolt
2. Fixing seat
3. Downrod
4. Fixing slot
5. Connecting bolt
Figure 10
1. Fixing seat
2. Fixing piece
3. Fixing screws
1. Remove the fixing piece from the mounting bracket and keep it aside.
2. Insert the connecting bolt into the downrod hole and then, insert the downrod into the
fixing seat on the mounting bracket.
ENERGYSILENCE AERO 4600 HELICOPTER
ENGLISH
47