Pioneer ND-PG1 Manual Del Propietário página 2

IMPORTANT INFORMATION
About this product
• This product complies with the EMC Directives (89/336/EEC, 92/31/EEC) and CE Marking
Directive (93/68/EEC).
This sensor unit detects rotation of a car wheel and transmits this information as car speed
pulse data to your mobile navigation unit.
Unit operation error
In the following cases, car speed pulse output from the sensor unit may be unstable result-
ing in error's for the location display. (The error is corrected after a short time if you con-
tinue driving.)
• When driving at a speed of 5 kph (about 3 mph) or less. (When in a traffic jam, when
stopping and starting repeatedly and when driving very slowly.)
• When reversing. (A car speed pulse is output even when you reverse your car, but
because the magnetic field is different from that when driving forward, pulse output is
unstable.)
• When crossing railway lines or bridges, or when driving close to large metal objects or
vehicles such as dump trucks. (Magnetism is affected, resulting in unstable pulse out-
put.)
Errors may occur if you locate this product near an electronic device that generates an
electromagnetic field.
Precaution
• Read this manual fully and carefully before installing this product.
• Keep this manual handy for future reference.
• Protect the product from moisture.
• Do not attempt to install or service this product by yourself. Installation or servicing of
this product by persons without training and experience in electronic equipment and
automotive accessories may be dangerous and could expose you to the risk of electric
shock or other hazards.
In case of trouble
Should this product fail to operate properly, contact your dealer or nearest authorized
Pioneer Service Station.
• Warranty condition for Europe, U.S.A. and Canada. The warranty period and conditions
of this accessory product are indicated on the warranty certificate which is included with
your mobile navigation unit.
1