Publicidad
1
3
18
English
WARNING :
An exposed release tab strap can catch on your clothing or other objects while
you are riding.
Never allow more than the tab of the release tab strap to be exposed outside of
the cheek pads.
Always ensure that the release tab strap is in its proper position before using
the helmet.
Always reset the release tab strap to its proper position as depicted in the
instruction manual when placing the cheek pads back on the helmet.
When first servicing the cheek pads, it is suggested that you do only one at a time so
that the other can be used as a reinstallation guide.
To remove the cheek pads, first undo chinstrap.
Gently pull the cheek pad toward the front of the helmet (1), then pull the back of the
2
cheek pad inward to release (2) and slide it off the strap.
To take off the fabric covering for washing, peel the covering off over the rear
4
edge of the cheek pad assembly until all the fabric is on the face side surface
(3). Then draw the covering through the opening by grasping the rectangular
collar and pulling (4).
Publicidad
