Hella Gutmann SEG V Manual Del Usuario página 113

Hella Gutmann
6. Open the virtual keypad under Host with
7. Enter the host name of the outbox server.
8. Close the virtual keypad with
9. Open the virtual keypad under Port with
10. Enter the port number of the outbox server.
11. Close the virtual keypad with
12. Open the virtual keypad under Sender address with
13. Enter the e-mail address of the sender.
14. Close the virtual keypad with
15. Click under User login.
The User login window is displayed.
16. Open the virtual keypad under Name with
17. Enter the user name of the sender.
18. Close the virtual keypad with
19. Open the virtual keypad under Password with
20. Enter the user password.
21. Close the virtual keypad with
22. Close the User login window with
The input will be saved automatically.
ð Reports can be sent via e-mail now.
7.9.5. Activating the >Screen Duplication< Function
The function >Screen duplication< enables the extension of the SEG V display to an external end device using a VNC
viewer. Thus it is possible to do all work steps via external device. The response time of the screen indication depends on
the network utilization. The example of VNC Connect describes the connection setup.
Proceed as follows to activate the function >Screen duplication<:
1. Select Settings > Device > Interfaces > Activate screen duplication.
Observe the information window.
The info window shows the data for connection to the VNC client (PC, tablet etc.) if the screen duplication has been acti-
vated successfully.
2. Start the VNC viewer on the terminal device and set up the connection. For this click to >File< and select >New con-
nection<.
3. Enter the IP address of the SEG V in line VNC server and confirm the entry with >OK<.
Now the info window of the VNC viewer indicates a symbol with the IP address of the SEG V.
SEG V
.
.
.
.
.
.
.
.
.
.
.
Device configuration | 7.
113