Publicidad
Idiomas disponibles
Idiomas disponibles
Hella Gutmann
• Protect the product from strong impacts and do not drop it.
• Do not open the device on your own. Only technicians authorized by Hella Gutmann are allowed to open the device.
Warranty and guarantee will be rendered void at any case of unauthorized tampering of the device or if the protective
seal is damaged.
• Immediately contact Hella Gutmann or a Hella Gutmann trading partner in case of any malfunctions.
• Arrange for any scratched Fresnel lenses to be replaced.
• Dust and scratches can have a negative impact on the display of the test screen. Only clean the lens with a soft cloth
and glass cleaner.
• Check the 9-V monobloc battery of the laser sight for leaks/sulphation in regular intervals.
• Arrange for damaged protective shields to be replaced before the next use.
2.3. Safety Notes Regarding High Voltage/Mains Voltage
Very high voltages occur in electrical systems. Due to voltage flashover on damaged components, such as marten dam-
age or touching live components, the risk of electric shock is likely. High voltage via the vehicle and line voltage via the
building's mains supply can cause severe injury or even death if adequate care is not taken. Voltage flashover can occur
e.g. on the primary and secondary side of the ignition system, the connection to the vehicle, the lighting systems or the
wiring harness with plug connections. Therefore regard the following:
• Only use power supply cables with grounding contact.
• Only use a checked or the attached power cord.
• Always use the original cable set.
• Regularly check cables and adapters for damage.
• Perform any assembly work such as the connection of the diagnostic device to the vehicle or the replacement of com-
ponents only when ignition is switched off.
SEG V
Safety Precautions | 2.
87
Publicidad
