Hella Gutmann SEG V Manual Del Usuario página 131

Hella Gutmann
NOTICE
Deletion processes cannot be undone.
8.4.5. Performing Documented Tests with Manually Created Vehicle
NOTICE
A documented test can only be done when the company data has been entered.
Proceed as follows to perform a documented test for a manually created vehicle:
1. Select >Documented test< in the main menu.
2. Observe the info window where necessary.
3. Confirm the info window with
4. Choose to call up the Manually create vehicle option.
5. Click to open the virtual keypad under Manufacturer.
6. Enter vehicle manufacturer.
7. Close the virtual keypad with
The input will be saved automatically.
8. Repeat steps 5–7 to make more inputs.
9. Confirm the inputs with
The Vehicle selection window is displayed.
10. Open the virtual keypad under Registration number with
11. Enter the vehicle registration number.
12. Close the virtual keypad with
The input will be saved automatically.
13. Repeat steps 10-12 under Vehicle owner and VIN.
14. Confirm the inputs with
The Target specifications window appears.
NOTICE
From software version 74 onwards, you can select the correct light distribution, e.g. for antiglare high beam,
with the manufacturer-specific name in the menu Adaptive light control. Hence you are able to check such
light systems even if the vehicle is not in the database.
SEG V
where necessary.
.
.
.
.
.
Working with the Device | 8.
131