Hella Gutmann SEG V Manual Del Usuario página 124

8. | Working with the Device
** N [cm] dimension by which the center of the light beam is tilted at a distance of 5 m
*** Does not apply to fog lights
8.3. Aligning the SEG V
8.3.1. Switching On the Laser
CAUTION!
Laser radiation
Damage to/destruction of the retina
Never look directly into the laser beam.
NOTICE
After switching on the laser, the laser output is activated for approx. 30 s via an integrated interval timer.
Within this time you can align the SEG V in front of the vehicle.
Proceed as follows to switch on the laser module:
1. Briefly push the ON/OFF button of the laser module (1).
The laser is activated for approx. 30 s.
2. If required, repeat step 1 to reactivate the laser.
ð Now you can align the SEG V in front of the vehicle.
8.3.2. Aligning the Optic Housing to the Vehicle
Fig. 6:
124
Hella Gutmann
SEG V