Balluff BTL7-P511-M S115 Serie Manual De Instrucciones página 29

BTL7-P511-M _ _ _ _ -BE/BF/CE/ZE/ZF-S32/S115/KA _ _ /FA _ _
Magnetostrictive Linear Position Sensor — Rod Style
1
Notes to the user
1.1 Scope
This guide describes the construction, function and setup
options for the BTL magnetostrictive linear position sensor
with SSI interface. It applies to types
BTL7-P511-M _ _ _ _ -BE/BF/CE/ZE/ZF-S32/S115/
KA _ _ /FA _ _ (see Type code on page 21).
The guide is intended for qualified technical personnel.
Read this guide before installing and operating the BTL.
1.2 Symbols and conventions
Individual instructions are indicated by a preceding
triangle.
► Instruction 1
Action sequences are numbered consecutively:
1. Instruction 1
2. Instruction 2
Note, tip
This symbol indicates general notes.
1.3 Scope of delivery
– BTL
– Condensed guide
The magnets are available in various models
and must be ordered separately.
www.balluff.com
1.4 Approvals and markings
Not for BTL7-...-FA_ _
US Patent 5 923 164
The US patent was awarded in connection with this
product.
The CE symbol confirms that our products
comply with the requirements of the
current EU directive.
The BTL meets the requirements of the following product
standard:
– EN 61326-2-3 (noise immunity and emission)
Emission tests:
– RF emission
EN 55011
Noise immunity tests:
– Static electricity (ESD)
EN 61000-4-2
– Electromagnetic fields (RFI)
EN 61000-4-3
– Electrical fast transients (burst)
EN 61000-4-4
– Surge
EN 61000-4-5
– Conducted interference induced
by high-frequency fields
EN 61000-4-6
– Magnetic fields
EN 61000-4-8
More detailed information on the guidelines,
approvals, and standards is included in the
declaration of conformity.
Severity level 3
Severity level 3
Severity level 3
Severity level 2
Severity level 3
Severity level 4
english 5