Balluff BTL7-P511-M S115 Serie Manual De Instrucciones página 41

BTL7-P511-M _ _ _ _ -BE/BF/CE/ZE/ZF-S32/S115/KA _ _ /FA _ _
Magnetostrictive Linear Position Sensor — Rod Style
7
Technical data (continued)
7.5 Dimensions, weights
Rod diameter 10.2 mm or 12.7 mm
Nominal length
For Ø 10.2 mm 25...7620 mm
For Ø 12.7 mm 25...2000 mm
Weight (depends on length)
BTL7-...BE/BF/ZE/ZF-... Approx. 2 kg/m
BTL7-...CE-... Approx. 2.5 kg/m
Housing material Stainless steel
Flange material Stainless steel
Rod material Stainless steel
Rod wall thickness
For Ø 10.2 mm 2 mm
For Ø 12.7 mm 3.25 mm
Housing mounting via
threads
BTL7-...BE/BF-... M18×1.5
BTL7-...CE-... M22×1.5
BTL7-...ZE/ZF-... 3/4"-16UNF
Tightening torque
For Ø 10.2 mm ≤ 100 Nm
For Ø 12.7 mm ≤ 290 Nm
7.6 Connection to the evaluation unit
The maximum sampling frequency f
current value is available with each sampling, can be found
in the following graphic:
f in Hz
A,max
Fig. 7-1: Maximum sampling rate depending on the nominal length
www.balluff.com
, at which a new
A,max
BTL7-...-KA_ _
Cable material PUR
cULus 20549
80 °C, 300 V,
internal wiring
Cable temperature –40...+90°C
Cable diameter ≤ 7 mm
Permissible bending
radius
Fixed routing ≥ 35 mm
Movable ≥ 105 mm
BTL7-...-FA_ _
Cable material PTFE
No UL approval available
Cable temperature –55...+200°C
Cable diameter ≤ 7 mm
Permissible bending
radius
Fixed routing ≥ 35 mm
Movable No permissible bending
radius
The minimum sampling frequency f
(1) 1 magnet
(2) 2...16 magnets
Nominal length in mm
is 62,5 Hz.
A,min
english 17