Publicidad
Idiomas disponibles
Idiomas disponibles
on; "
" location: At the same time, move the right
handlebar light switch to the "
low beam headlight comes on. When you ride the
motorcycle in an urban area or see a vehicle coming
from ahead, switch to the low beam headlight so as
not to affect the sight of other drivers.
4 Turn signal light switch
Move the turn signal light switch to the "
position and the corresponding turn signal light will
flash. And, the green turn signal indicator light on
the instrument panel will flash accordingly. To deac-
tivate the turn signal, move the turn signal light
switch to the center or press the switch downward.
Warning
When changing lanes or turning, turn on the turn
signal light in advance and make sure no vehicle
behind is passing. After changing lanes or turning,
turn off the turn signal light in time to prevent
affecting the normal driving of other vehicles and
avoid accidents.
5 Overtaking light switch
When crossing or overtaking, press this button con-
" position, and the
tinuously and the high beam headlight will flash con-
secutively to warn the vehicle ahead.
6 Instrument panel adjusting button
See "Instrument panel adjusting button".
Clutch lever adjuster (optional)
For ride comfort, adjust the
" or "
"
clutch lever position by adjust-
ing the position of the knob
with the ring nut. Adjustment
may be made by choosing one of four positions.
When adjusting, move the clutch lever forward hori-
zontally, and then rotate the ring nut adjuster for
alignment with the arrow (A) to get the desired posi-
tion. And, the clutch lever is furthest from the grip at
Position 1 and nearest from the grip at Position 4.
Right Handlebar
1 Start/Stop switch
When the switch is moved to
the "
cle is powered on, and the
engine can be started.
12
" position, the motorcy-
Front
Publicidad
