Publicidad
Idiomas disponibles
Idiomas disponibles
Rear shock absorber adjustment
The rear shock absorber of the
motorcycle is mainly com-
posed of the shock absorber
spring and spring preload,
which can be adjusted accord-
ing to the driver's wishes,
bearing conditions, road con-
ditions and other factors.
When adjusting, support the motorcycle on its side
stand firmly.
According to the road conditions, adjust the spring
preload by adjusting the upper adjusting nut 1 of
the shock absorber to increase the comfort of the
driver.
Rearview mirror adjustment
When the rearview
mirror is in the folded
state, hold the mirror
lever of the rearview
mirror and turn the
Mirror lever
mirror lever outward
to unfold the rearview mirror, and then turn the mir-
ror lever inward to fold the rearview mirror.
There is an adjustable ball joint 1 between the
rearview mirror lever and the mirror frame, which
can be used to adjust the angle of the rearview mir-
ror. Adjust properly the rearview mirror frame until
you can clearly see the conditions behind the
motorcycle.
Installation and removal of seat
Insert the key into the keyhole 1 of the seat on the
left side of the motorcycle. Turn the key clockwise to
remove the driver seat. Push the passenger seat
Mirror frame
backward, and push the snap hook 2 on the back
of the seat into the seat limit plate 3, align the lock
Retract
hook 4 on the back of the seat with the lock hole
5, and then press the seat downward. A locking
Unfold
sound shows that the passenger seat has been
installed in place.
16
Notice
When driving a motorcycle, please unfold the rear-
view mirror. The driver sits in the driver seat, and
adjust the rearview mirror frame to ensure that the
driver has a clear view of the road.
Publicidad
