between the gear position 1 and gear position 2.
Because of the ratchet mechanism, the gear posi-
tion can only be shifted one by one.
Caution
When the transmission is placed at the neutral
position, the neutral indicator light on the instru-
ment panel will come on. Now, still slowly release
the clutch lever to determine whether the transmis-
sion is actually at the neutral position.
Rear brake pedal
Depress the rear brake pedal
to brake the rear wheel;
When the rear brake is oper-
ated, the brake light will come
on.
Side Stand
The side stand is located on the left side of the
motorcycle. When parking, please deploy the side
stand. The side stand has an automatic shutdown
function: When the side stand is in the parking state
(the side stand is deployed), the engine cannot be
started or automatically shut down after start if the
engine gear is place at a non-neutral position. The
engine can be started normally only when the side
stand is retracted.
Notice
Do not support the motorcycle on an inclined
slope. Otherwise, the motorcycle may roll over.
Please check the position of the side stand before
parking the motorcycle.
USB interface
There is a (5V/2A) USB inter-
face on the left side of the
instrument panel in the front of
the motorcycle, which can be
used to charge mobile phones
and other components.
Tools supplied with motorcycle
The tools supplied with motorcycle are fixed under
the bottom plate of the passenger seat. Use the
tools supplied with motorcycle to make easy repairs,
minor adjustments and parts replacement during
driving.
15