Publicidad
Idiomas disponibles
Idiomas disponibles
4. Remove the spark plug and inject 1 spoon (15-
3
20 cm
) clean oil into the cylinder, and then start
the engine several times to distribute the
poured oil to each part of the cylinder, and then
reinstall the spark plug.
Notice
When running the engine, turn the ignition switch
to the "OFF (
)" position, and insert the spark
plug into the cable cover for grounding to prevent
damage to the ignition system.
5. Remove the battery and store it separately in a
place free from being frozen and direct sunlight.
6. Clean and dry the motorcycle. Wax all the
painted surfaces.
7. Inflate the tire to a proper tire pressure. Place
the motorcycle on a cushion block with the two
tires off the ground.
8. Cover the motorcycle (do not use plastic or
coating materials) and keep it in a dry and
unheated place with minimal temperature
change. Do not store the motorcycle in the
direct sunlight.
Use of the motorcycle after storage
Remove the covering and clean the motorcycle.
Change the engine oil if the motorcycle has been
stored for more than four months.
Check the battery, and charge (as needed) and then
install it in place.
Carry out a comprehensive inspection before riding.
Perform a motorcycle test run at a low speed in a
safe area away from the road.
SRK 125 R Technical Specifications
QJ154MI-4C, single cylinder,
Engine
four-stroke, liquid-cooled
Displacement 125cm
Cylinder bore
54.0 x 54.5mm
x stroke
Maximum net
11.0kW/9500rpm
power
Maximum
12.1N·m/7000rpm
torque
40
3
Publicidad
