Descargar Imprimir esta página

QJMOTOR SRK 550 Manual Del Usuario página 20

Publicidad

Idiomas disponibles

Idiomas disponibles

Left handle
① Clutch handle
When starting the engine or shifting
gears, grip the clutch handle to cut
off the drive to the rear wheel.
② Headlight high and low beam
switch
When the light switch on the right handlebar is turned
to the "
" position: when the headlight high and low
beam switch is pressed to the "
headlight high beam is on, and the high beam indica-
tor on the instrument panel is also on; when the
switch is pressed to the "
low beam is on. When you drive in the urban area or
there is another vehicle ahead, use the low beam to
avoid affecting the reciprocal line of sight.
③ Turn signal lamp switch
Press the turn signal lamp switch "  " or "  ", and
the left or right turn signal lamp flashes. At the same
time, the green steering indicator on the instrument
panel flashes accordingly. To deactivate the turn
signal, turn the turn signal switch to the middle or
press down the switch.
" position, the
" position, the headlight
15
Warning
When changing lanes or turning, turn on your turn
signal lamp and make sure there is no vehicle
behind you. After changing lanes or turning, turn
off the turn signal lamp in time to avoid affecting
the normal running of other vehicles and avoid
accidents.
④ Horn button
Press the horn button and the horn will sound.
⑤ Overtaking switch
When rendezvousing with other vehicle or overtak-
ing, press this button continuously, the headlight will
flash continuously to warn the vehicle ahead.
⑥ Clutch handle regulator
The position of the clutch lever
can be adjusted by adjusting
the position of the knob via the
ring nut as required for operat-
ing comfort. Adjust one of the
four optional positions. Just move the clutch handle
Front

Publicidad

loading