Publicidad
Idiomas disponibles
Idiomas disponibles
(H direction) to the maximum limit, and then rotate it
back (S direction) for 2 turns.
Warning
Shock absorption adjustment requires profession-
al skills. Please contact the local QJMOTOR
service station to adjust the shock absorption.
Private adjustment may cause safety accidents
due to uncoordinated adjustment.
When the adjuster is rotated to the limit position,
please do not continue to rotate in this direction,
otherwise the shock absorber will be damaged.
Rear shock absorber
The rear shock absorber of this
vehicle is mainly composed of
damping
spring
and
damper, which can be adjusted
according to various factors such
as driver's preference, vehicle load
bearing and road conditions. When
adjusting, the rear wheel support
frame shall be used to stabilize the vehicle and keep
hydraulic
the rear wheel off the ground.
The damping force of shock absorber can be adjust-
ed by rotating the adjusting nut ① at the lower end of
the shock absorber: rotate the adjusting nut clock-
wise or counterclockwise with a slotted screwdriver,
and the damping force of the shock absorber will
also increase or decrease, so as to change the
rebound speed of the shock absorber. The damping
force adjusting nut will make a "click" sound every
time it is adjusted to one gear. It has been marked
when leaving the factory, and customers are advised
not to adjust it by themselves.
Warning
The preload of the rear shock absorber (the
degree of softness and hardness of the spring) has
been adjusted to the best riding condition in the
factory. Damping preload adjustment requires
expertise, if adjustment is required, please contact
The service station of the local QJMOTOR service
agency adjusts the shock absorber. Unauthorized
adjustment may cause safety accidents or
damage to parts due to uncoordinated adjustment.
21
Publicidad
