Creating Your Own Program (Program Play) - Sony CMT-SBT20 Manual De Instrucciones

Creating your own
program (Program Play)
Plays the programmed track or file.
1
Press   to stop playback.
2
Press PLAY MODE  repeatedly
to select "PROGRAM."
3
When playing back an MP3/WMA
+/–  to select the
disc, press
folder containing the tracks or
files that you want to program.
4
Press /  to select a
desired track or file, then press
 .
Selected track Total playing time of
or file number the selected track
(CD-DA disc only)
For MP3/WMA file, the name or title of
selected file appears on the display 
first, and total playing time is not
displayed.
5
Repeat step 4 (for CD-DA tracks)
or step 3 through 4 (for MP3/
WMA files) to program.
You can program up to a total of 64
tracks or files.
6
Press   .
Your program of tracks or files starts
playback.
To cancel program play
Press PLAY MODE  repeatedly to select
"OFF."
To delete a programmed track or
file
Press CLEAR  while the play is stopped.
Each time you press the button, the last
programmed track or file will be deleted.
When all the programmed tracks or files are
deleted, "NO STEP" appears.
Tip
• To play the same program again, press   .
Note
• Up to 64 tracks or files can be programmed. If you
attempt to program more than 64 tracks or files,
"FULL" will be displayed.
• If you perform any of the following operations
after programming, all the programmed tracks
and files will be deleted.
– Changing the function.
– Turning off the system.
– Disconnecting the power cord.
– Opening the disc tray.
13
GB