Setting The Wireless Bluetooth Signal On Or Off; Adjusting The Sound - Sony CMT-SBT20 Manual De Instrucciones

Ocultar thumbs Ver también para CMT-SBT20:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Setting the wireless
BLUETOOTH signal
on or off
When the system is turned on, you
can control a BLUETOOTH signal. The
BLUETOOTH signal is turned on by default.
1
Press /  to turn on the
system.
2
Press and hold   and
   on the unit at the same
time for 5 seconds.
3
After "BT OFF" (wireless
BLUETOOTH signal is off) or
"BT ON" (wireless BLUETOOTH
signal is on) appears, release the
buttons.
Tip
• When this setting is set to "BT OFF", the
BLUETOOTH function is not available.
• If the unit is touched with a smartphone/tablet
with NFC function when this setting is off, the
system is turned on and this setting changes to
"BT ON".
• When this setting is off, the BLUETOOTH standby
mode cannot be set.
• When this setting is off, the system and
BLUETOOTH device cannot be paired.

Adjusting the sound

You can select the desired sound from the
various styles and change the effectiveness
of the bass sound.
Selecting the desired sound
Press EQ  repeatedly to select the desired
sound from the following styles:
"R AND B/HIP HOP," "FLAT," "POP," "JAZZ,"
"ROCK," "CLASSIC."
Tip
• The default setting is "R AND B/HIP HOP."
Change the effectiveness of the
bass sound
Press MEGA BASS  .
Each press switches the feature on
("BASS ON") and off ("BASS OFF").
Tip
• The default setting is "BASS ON."
25
GB

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido