SEVERIN KS 9770 Instrucciones De Uso página 22

17. Turn the holding bracket 4 with its hinge bolt and
plastic plate through 180°.
18. Replace the bracket bolt on the opposite side of the
freezer door and secure it with the screws.
19. Replace the covering caps over the screw heads.
20. Place the refrigerator door onto the hinge bolt on
holding bracket 4. Caution: Support the door.
21. Re-insert the hinge bolt of the bracket 6 into the
refrigerator door and secure it with the screws.
22. Fit the four covers C over the bracket and the
openings.
23. Remove the screw covering caps a.
24. Take out the screws holding the door handles. Move
the handle slightly towards the side with the screw and
then pull the handle off to the front.
25. Fit the handles on the opposite side, using the fi xing
screws to secure them (note that the screws need
to go through the sealing plugs b). Push the sealing
plugs provided (b) into the now empty openings in the
door and replace the covering caps (a) on the screw
heads.
26. Take out the cover 10 from the lower panel 1 and
replace it on the opposite side.
27. Replace the panel 1 on the appliance.
22
Disposal
Appliances that are marked with this symbol have
to be disposed of separately from household
rubbish. These appliances contain valuable
resources that can be recycled. A correct waste
disposal protects the environment and the health of those
around you. To get informed about it, either defer to your
municipal administration or the retailer.
∙ Pull the mains plug out of the socket and disconnect it
from the appliance before getting rid of it.
∙ The cooling medium Isobutane (R600a) and
the propellant in the isolation Cyclopentane
(C5H10) are infl ammable substances, thus,
need to be appropriately disposed of.
∙ Make sure the tubes of the cooling circuit don't get
damaged before the proper disposal