Packaging Sizes; Warranty/Exclusion Of Liability; Testing The Blanks; Inserting Into Lava™ Milling Machines - Amann Girrbach ceramill sintron multi Instrucciones De Uso

WA RR AN TY /E X CL U SI ON O F L IA BI L I TY

Packaging sizes

E N
Art. No.
761151
761153

Warranty/Exclusion of Liability

Application-technical recommendations, whether given orally, in writ-
ing or in the course of practical training, are guidelines. Our products
are subject to continuous further development. Subject to changes in
handling and composition.

Testing the Blanks

Upon receipt, it is imperative to visually check the proper condition of
the Ceramill Sintron blanks. After using a (transport-)damaged blank,
complaint claims are no longer possible.
Inserting into Lava™ Milling Machines
The blanks are already bonded in the normal blank holder for Lava™
systems.
▷ Remove the label with the scaling factor from the blank.
▷ Insert the blank as usual into Lava™ systems.
24
Designation
Ceramill Sintron Multi
(15.3 mm)
Ceramill Sintron Multi
(18 mm)
Before processing Ceramill Sintron, the milling chamber of the
milling machine must be cleaned.
Description
CoCr blank, height = 15.3 mm
CoCr blank, height = 18 mm
Package
Pack of 2
Pack of 2