Basic Copying; Paper Size - Canon imageRUNNER 2202N Guida Rapida

Basic Copying

This section describes the flow of basic copy operations. For more details, see e-Manual > Copy.
01
Press [ ] (COPY/SCAN).
If a log in screen for Department ID Management
appears, you must enter the applicable authentication
information (ID, password/PIN).
02
Place your originals.
NOTE
For help, see e-Manual > Basic Operations.
03
Specify the desired copy settings.
Copy: Press Start
100% A4
1
+ -
Density: 0
Original Type: Text
2-Sided: Off
NOTE
For more information on specifying copy settings, see
e-Manual > Copy.
28

Basic Copying

01
04
Enter the desired copy quantity (from 1
to 99) using -
Copy: Press Start
100% A4
1
+ -
Density: 0
Original Type: Text
2-Sided: Off
05
Press [ ] (Start).
■If the original is placed in the optional feeder:
Copying starts.
• Proceed to step 6.
■If the original is placed on the platen glass:
• Use [ ] or [ ] to select the size of the placed original
→ press [OK].

Paper Size

A4
A4R
A3
A5
Copying starts.
06
If you want to start copying the next
original while printing for the current job is
in progress, repeat steps 2 to 5.
07
When copying is complete, remove
your originals.
If a login service such as Department ID Management
has been set, press [
(numeric keys).
01
] (Log In/Out) to log out.