Maintenance, Cleaning And Diagnosis; Monitoring And Maintenance; Cleaning; Fuse Replacement - Ivoclar Vivadent Cap Vibrator Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

8. Maintenance, Cleaning
and Diagnosis
This chapter describes the user maintenance and
cleaning procedures that can be carried out by dental
lab professionals. All other tasks must be performed by
qualified service personnel at a certified Ivoclar Vivadent
Service Center.

8.1 Monitoring and maintenance

The time for these maintenance procedures depends on
the frequency of use and the working habits of the user.
For that reason, the recommended times are only
approximations.

8.2 Cleaning

Item
Frequency
cover
if required
capsule holder
if required

8.3 Fuse replacement

Risks and dangers
Switch off the machine and disconnect the
mains before maintenance and cleaning.
1. Open fuse holder
A
B
A Main fuse
B Reserve fuse
2. Remove defective fuse (A)
3. Remove reserve fuse (B) and put it in the
4. Close fuse holder
8.4 Shipment for repairs and service
Fasten transport securing screw (8) to base (13) before
shipping the apparatus. Do not tilt the Cap Vibrator,
otherwise the screw threads cannot grip securely.
Cleaning material
Use only original packaging for shipping.
soft, dry cloth
cleaning brush
forward slot.
Contraindications:
Do not use strong acids and solvents (e.g.
MMA) that may damage the surface varnish.
8
19

Publicidad

Tabla de contenido
loading

Tabla de contenido