Electromagnetic Emissions - DJO ARTROMOT K1 Classic Modo De Empleo

EMC
(electromagnetic
compatibility)
Ambient conditions
(storage, transport)
temperature:
relative humidity:
atmospheric
pressure:
9. IEC 60601-1-2:2001
The ARTROMOT®-K1 classic device is
subject to particular precautions regar-
ding electromagnetic compatibility
(EMC). The device must be installed and
put into service strictly in compliance
with the EMC directives put forth in the
accompanying documents.
Portable and mobile RF communication
systems may affect the ARTROMOT®-K1
classic device.

9.1 Electromagnetic emissions

Guidance and Manufacturer's Declaration – Electromagnetic Emissions
ARTROMOT®-K1 classic is intended for use in the electromagnetic environment
specified below. It is the responsibility of the customer or user to ensure that the
ARTROMOT®-K1 classic device is used in such an environment.
Emissions test
RF emissions to
CISPR 11
RF emissions to
CISPR 11
Harmonic emissions to
IEC 61000-3-2
Voltage fluctuati-
ons/flicker emissions to
IEC 61000-3-3
IEC 60601-1
2:2001
-24 ºC to +60 ºC
(-12 °F to +140 °F)
20 % to 85 %
700 hPa to
1060 hPa
Compliance
Group 1
Class B
not applicable
not applicable
Ambient conditions (operation)
temperature:
relative humidity:
atmospheric
pressure:
Subject to change without notice.
(08/06)
ARTROMOT®-K1 classic should not
be used adjacent to or stacked with
other equipment.
If adjacent or stacked use is necessary,
ARTROMOT®-K1 classic should be
observed to verify normal operation in
the configuration in which it will be used.
We can guarantee the specified electro-
magnetic emission and immunity data
only if the manufacturer's original spare
parts are used in repair and maintenance
of the device.
Electromagnetic environment –
guidance
ARTROMOT®-K1 classic uses RF energy
only for its internal function. Therefore, its
RF emissions are very low and are not
likely to cause any interference in nearby
electronic equipment.
ARTROMOT®-K1 classic is suitable for
use in all establishments, including domestic
and those directly connected to the public
low-voltage power supply network that
supplies buildings used for domestic
purposes.
44
+10 ºC to +40 ºC
(50 °F to +104 °F)
30 % to 75%
700 hPa to
1060 hPa