Yamaha DSP-AZ2 Manual De Instrucciones página 61

I 1F FRONT EFCT SP (front effect
speaker mode)
This unit uses front effect speakers to localize the virtual
sound sources of the sound field programs. If you do not
use front effect speakers, you can direct the front effect
signals to the main speakers.
The OSD shows small or no front effect speakers
depending on how you set this item.
Choices: YES, NONE
Initial setting: YES
YES
Select this setting if you use front effect speakers.
1F FRONT EFCT SP
Y E S N O N E
NONE
Select this setting if you do not use front effect speakers.
The front effect signals are mixed with the main channels.
1F FRONT EFCT SP
Y E S N O N E
I 1G MAIN LEVEL (main level
mode)
Change this setting if you cannot match the output level
of the center, rear (L/R) and rear center speakers with the
main speakers because of the unusually high-efficiency
performance of the main speakers.
Choices: Normal, –10 dB
Initial setting: Normal
Normal
Select this if you can match the output level of your effect
speakers with that of your main speakers when using the
test tone.
1G MAIN LEVEL
N o r m a l - 1 0 d B
–10 dB
Select this if you cannot match the output level of your
effect speakers with that of your main speakers when
using the test tone.
1G MAIN LEVEL
N o r m a l - 1 0 d B
I 1H SP B SET (speaker B set)
Use this feature to select the location of the main speakers
to be connected to the SPEAKERS B terminals.
Choices: MAIN, ZONE B
Initial setting: MAIN
MAIN
Select this to turn on/off SPEAKERS A and B when the
speakers connected to the SPEAKERS B terminals are set
in the main room.
1H SP B SET
" M A I N Z O N E B
- / + : S e l e c t
/ : E x i t
ZONE B
Select this if the speakers connected to the SPEAKERS B
terminals are set in the second room. If SPEAKERS A is
turned OFF and SPEAKERS B is turned ON, all the
effect speakers in the main room are muted and the sound
is output only from SPEAKERS B.
1H SP B SET
M A I N " Z O N E B
- / + : S e l e c t
/ : E x i t
y
• When a DSP program is selected, this unit automatically enters
the Virtual CINEMA DSP mode. If the headphones are
connected to PHONES jack on this unit in the Virtual
CINEMA DSP mode, this unit enters the SILENT CINEMA
DSP mode and the sound is output from both headphones and
SPEAKERS B.
SET MENU
59