Yamaha DSP-AZ2 Manual De Instrucciones página 74

DIGITAL SOUND FIELD PARAMETER DESCRIPTIONS
I LIVENESS
Function: This parameter adjusts the reflectivity of the virtual walls in the hall by changing the rate at which the
early reflections decay.
Description: The early reflections of a sound source decay much faster in a room with acoustically absorbent wall
surfaces than in one which has highly reflective surfaces. A room with acoustically absorbent surfaces
is referred to as "dead", while a room with highly reflective surfaces is referred to as "live". The
LIVENESS parameter lets you adjust the early reflection decay rate, and thus the "liveness" of the
room.
Sound Source
I S. DELAY (Surround Delay)
Function: This parameter adjusts the delay for surround signals and surround sound field.
I S. INIT. DLY (Surround Initial Delay)
Function: This parameter adjusts the delay between the direct sound and the first reflection on the surround side
of the sound field. You can only adjust this parameter when at least two front channels and two rear
channels are used.
I S. ROOM SIZE (Surround Room Size)
Function: This parameter adjusts the apparent size of the surround sound field.
I S. LIVENESS (Surround Liveness)
Function: This parameter adjusts the apparent reflectivity of the virtual walls in the surround sound field.
I RC INIT. DLY (Rear Center Initial Delay)
Function: This parameter adjusts the delay between the direct sound and the first reflection in the rear center
sound field.
I RC ROOM SIZE (Rear Center Room Size)
Function: This parameter adjusts the apparent size of the rear center sound field.
I RC LIVENESS (Rear Center Liveness)
Function: This parameter adjusts the apparent reflectivity of the virtual wall in the rear center sound field.
72
Dead
Time
Small Reflected
Sound
Small value = 0
Source Sound
Time
Large
Reflected Sound
Large value = 10
Control Range 0 – 49 msec (The range
depends on the signal format.)
Control Range 1 – 49 msec
Control Range 1 – 49 msec
Control Range 0 – 10
Live
Time
Control Range 0.1 – 2.0
Control Range 0 –10
Control Range 0.1 – 2.0
Control Range 0 – 10