Vermeiren TRACER Manual De Instrucciones página 11

Adjust the screen brightness
By default, the factory sets the brightness of the display to be automatically adjusted to match the light
conditions. To change this function, proceed as follows:
Select left/right with the joystick or the menu
selection button (10) until the time function you
want appears in the centre of the display.
If you want to change the display option for the
time, confirm by moving the joystick upwards.
The option currently selected will appear in the
menu and the centre of the display. To change
this, select left/right with the joystick or the
left/right menu selection button (10).
To save the option you want, confirm by moving
the joystick upwards.
To switch back to the driving program, select the
drive profile button (8) in drive mode.
Select the program function using the field
selection button (9) and the display will show the
menu for the special functions.
Select left/right with the joystick or the menu
selection button (10) until the brightness function
you want appears in the centre of the display.
If you want to change the brightness of the
display, confirm by moving the joystick upwards.
Adjust the brightness of the display by moving the
joystick left/right or selecting the left/right menu
selection button (10).
To save the brightness you have selected, confirm
by moving the joystick upwards or downwards.
To switch back to the driving program, select the
drive profile button (8) in drive mode.
Select the program function using the field
selection button (9) and the display will show the
menu for the special functions.
Select left/right with the joystick or the menu
selection button (10) until the brightness function
you want appears in the centre of the display.
If you want to change the brightness function,
confirm by moving the joystick upwards.
9
E
TRACER
01/2010