Operation Handle Positions; To Adjust The Handle And The Handlebar - Husqvarna PG 690 Manual Del Usuario

6. Hang the dust extractor hose on the suspension
device on the support frame to prevent tension in the
dust extractor hose.
7. Disengage the support frame.

Operation handle positions

• Position of the handle for manual operation:
• There are 2 recommended positions of the handle
for remote control operation and transportation of the
product.
Position 1:
1163 - 003 - 22.01.2020
Position 2:
• Servicing position of the handle:

To adjust the handle and the handlebar

WARNING: Be careful when you adjust the
handle and the handlebar. Make sure that
the handle and the handlebar locks into
position. The moving parts can cause injury.
Set the handle height as close as possible to the height
of the operators hip. During operation the product can
pull to the side. The hip of the operator can help to stop
this movement to the side.
19