Handle Positions; To Adjust The Handle And The Handlebar - Husqvarna DURATIQ XP6 Manual Del Usuario

5. Attach the suspension device on the attach point on
the product.
6. Hang the dust extractor hose on the suspension
devices on the product to prevent tension in the dust
extractor hose.

Handle positions

• Position of handle for manual operation:
• There are 2 recommended positions of the handle
for transportation of the product.
Position 1:
16
Position 2:
• Servicing position of the handle:

To adjust the handle and the handlebar

WARNING: Be careful when you adjust the
handle and the handlebar. Make sure that
the handle and the handlebar locks into
position. The moving parts can cause injury.
Set the handle height as close as possible to the height
of the operators hip. During operation the product can
pull to the side. The hip of the operator can help to stop
this movement to the side.
1268 - 002 - 25.05.2020