Astralpool WELLMA Manual De Uso página 33

Perfiles para fijacion del techo
Profiles for ceiling assembly
GRAPHICAL REPRESENTATION OF HOW TO ASSEMBLE
THE PREFABRICATED MODULES
The number of ceiling modules will depend on the measurements of the
booth, but the assembly system will always be the same.
1. Place the end of the module with the largest fit into the grid runner.
2. Insert the other end of the module into the opposite ceiling grid runner.
3. Move the module as far as possible into the runner so that the module fits
perfectly into both tunners.
This step is done in the center of the booth, once the module is inserted, it
can be moved via the runners until it is in the correct position as indicated in
the following diagrams.
4. Once all of the modules are inserted, attach the rubber washer as indicated
in the diagram.
4