Parental Control Settings - Sony DAR-RD100 Manual De Instrucciones

Parental Control Settings

Playback of some DVD VIDEOs can be limited
according to a predetermined level, such as the age
of the users. Scenes may be blocked or replaced
with different scenes.
Select [Parental Control] in the Setup Display.
To use the display, see "Using the Setup Displays"
(page 74).
[Set Password]
Sets or changes the password for [Parental
Control].
1
Set the AMP/DVD switch to DVD, select [Set
Password], and press ,.
If you have not entered a password, the
display for entering a new password appears.
Parental Control
Set Password
Parental Control
Area Code
Enter a four-digit password using the number
buttons and press ENTER. Enter the password
again to confirm, and press ENTER while
[OK] is selected.
The password is stored.
• If you make a mistake, press < repeatedly
to delete numbers one by one, then re-enter
it.
2
To change the password, press ENTER while
[Change] is selected.
[Erase]: Erases the password. Enter the
registered password and press ENTER.
3
Enter the registered password and press
ENTER.
4
Enter a new four-digit password and press
ENTER.
5
Enter the password again to confirm and press
ENTER.
82
GB
Change
Delete New Password
OK
z Hint
If you forget your password, clear the password and
registered a new password.
Press SET UP to turn on the Setup Display. Enter the six-
digit number 210499 using the number buttons. Select
OK
[ ] and press ENTER. The registered password is
cleared.
[Parental Control]
Selects the limitation level.
1
Set the AMP/DVD switch to DVD, select
[Parental Control], and press ,.
Parental Control
Set Password
Parental Control
Area Code
The display asks for the password.
2
Enter the four-digit password using the
number buttons and press ENTER.
3
Select the level and press ENTER.
The lower the level, the stricter the limitation.
If you select [No Limit], the Parental Control
function does not activate.
[Area Code]
Selects a code for a geographic area as the
playback limitation level. See "Area Code List"
(page 117).
1
Set the AMP/DVD switch to DVD, select
[Area Code], and press ,.
2
Enter the four-digit password using the
number buttons and press ENTER.
3
Press M/m to enter the first character of the
area and press ,.
4
Press M/m to enter the second character and
press ENTER.
Notes
• When you play discs which do not have the Parental
Control function, playback cannot be limited on this
recorder.
• Depending on the disc, you may be asked to change the
Parental Control level while playing the disc. In this
case, enter your password, then change the level.
No Limit
Level 8 (Adult)
Level 7
Level 6
Level 5
Level 4
Level 3
Level 2
Level 1 (Kids)