Speaker Surround Options; Checking The Status Information On The Centre Unit Display - Sony DAR-RD100 Manual De Instrucciones

Speaker Surround Options

Checking the Status
Information on the Centre
Unit Display
You can set up the speaker system while checking
the status information on the centre unit display.
Centre unit display
DIGITAL PL
LINK
L C R
SL SW SR
The following information appears.
"; DIGITAL"
(Dolby Digital),
" " (DTS)
"; PL" (Dolby Pro
Logic), "; PLII"
(Dolby Pro LogicII),
"DCS"
"LINK"
"DSGX"
"A/V SYNC"
"L," "C," "R," "SL,"
"SW," "SR"
84
GB
A/V SYNC DCS DSGX
Indicates the current audio
signal format.
Indicates the current
surround format (page 85).
Lights up when a 2
channel source is output
from the surround
speakers (page 86).
Lights up when DSGX is
activated (page 87).
Lights up when A/V SYNC
is activated (page 88).
Lights up to indicate the
speaker you are adjusting.
To turn down the brightness of the centre unit
display (DIMMER)
1 1
4 4
7 7
DIMMER
Set the AMP/DVD switch to AMP, and press
DIMMER. The centre unit display darkens
("ON") and brightens ("OFF") with each press.
AMP/DVD AMP/DVD
switch switch
2 2 3 3
5 5 6 6
8 8 9 9
0 0