Recording Settings - Sony DAR-RD100 Manual De Instrucciones

Recording Settings

The [Rec Setting] Setup allows you to adjust the
recording picture quality and size.
Select [Rec Setting] in the Setup Display. To
use the display, see "Using the Setup Displays"
(page 74). The default settings are underlined.
Rec Setting
Rec Mode Set
Rec Aspect Ratio
DV Audio Input
Auto Chapter
[Rec Mode Set]
Selects one of the following recording modes: HQ
(High Quality), SP (Standard Play), EP (Extended
Play), SLP (Super Long Play).
[Rec Aspect Ratio] (DVD-RW (VR mode) only)
Selects the picture size of the programme to be
recorded.
When recording on discs other than DVD-RWs
(VR mode), the screen size is fixed to 4:3.
[ 4:3 ]
Sets the picture size to 4:3.
[ 16:9 ]
Sets the picture size to 16:9 (wide
mode).
[DV Audio Input]
Selects the stereo track when recording from a
digital video camera connected to the DV IN jack
on the front panel.
[ Stereo 1 ] Records original sound at the time
of shooting. Normally select this
when dubbing a DV/Digital8
format tape.
[ Stereo 2 ] Records only additional sound
over-dubbed after shooting.
[Auto Chapter]
Automatically divides a recording (a title) into
chapters by inserting chapter markings at a
specified interval. The markings are inserted while
the recording is being made.
[ Off ]
No chapter mark is inserted.
Depending on the size of the recording being made, the
actual interval may vary from the interval selected in
[Auto Chapter]. The selected interval should only be
used as an approximation to create chapters.
HQ
SP
EP
SLP
[ 5Min ]
Sets the interval to 5 minutes.
[ 10Min ]
Sets the interval to 10 minutes.
[ 15Min ] Sets the interval to 15 minutes.
Note
83
GB