Specifications - Sony DAR-RD100 Manual De Instrucciones

Specifications

Design and specifications are subject to change
without notice.
For supplied accessories, see page 12.
DVD recorder specifications
System
Laser: Semiconductor laser
Channel coverage:
PAL/SECAM (B/G, D/K, I, L)
VHF: E2 to E12, R1 to R12, F1 to F10, Italian
A to H, Ireland A to J, South Africa 4 to 13/
UHF: E21 to E69, R21 to R69, B21 to B69,
F21 to F69/CATV: S01 to S05, S1 to S20,
France B to Q/HYPER: S21 to S41
The above channel coverage merely ensures the
channel reception within these ranges. It does not
guarantee the ability to receive signals in all
circumstances.
Video reception: Frequency synthesizer system
Audio reception: Split carrier system
Aerial out: 75-ohm asymmetrical aerial socket
Timer: Clock: Quartz locked/Timer indication:
24-hour cycle (digital)
Video recording format: MPEG Video
Audio recording format: Dolby Digital/2 ch
Inputs and outputs
LINE 2 OUT
(AUDIO): Phono jack/2 Vrms/600 ohms
(VIDEO): Phono jack/1.0 Vp-p
(S VIDEO): 4-pin mini DIN/Y:1.0 Vp-p, C: 0.3
Vp-p (PAL)
LINE 2 IN/LINE 4 IN
(AUDIO): Phono jack/2 Vrms/more than 47
kilohms
(VIDEO): Phono jack/1.0 Vp-p
(S VIDEO): 4-pin mini DIN/Y:1.0 Vp-p, C: 0.3
Vp-p (PAL)
LINE 1 -TV: 21-pin
CVBS IN/OUT
RGB OUT (upstream)
LINE 3/DECODER: 21-pin
CVBS IN/OUT
Decoder
DV IN: 4-pin/i.LINK S100
DIGITAL OUT (OPTICAL): Optical output
jack/–18 dBm (wave length: 660 nm)
DIGITAL OUT (COAXIAL): Phono jack/0.5
Vp-p/75 ohms
COMPONENT VIDEO OUT
(Y, P /C , P /C ):
B B R R
Phono jack/Y: 1.0 Vp-p, P
P /C : 0.7 Vp-p
R R
General
Power requirements: 220-240 V AC, 50/60 Hz
Power consumption: 30W
Dimensions (approx.): 430 × 75 × 293 mm
(width/height/depth) incl. projecting parts
Mass (approx.): 4.0 kg
Operating temperature: 5 ºC to 35 ºC
Operating humidity: 25 % to 80 %
Compatible colour systems
This recorder is designed to record and play using
the PAL colour system.
The signals of the SECAM colour system can be
received or recorded but will be played back in the
PAL colour system only. Recording of video
sources based on other colour systems cannot be
guaranteed.
Speaker system specifications
AUDIO POWER
Amplifier section
Stereo mode (rated):
55W+55 W (3 ohms at 1 kHz, DIN)
Music power output when in surround mode
(reference):
Front: 120 W+120 W (with SS-TS31)/
Centre*: 120 W (with SS-CTRD1)/
Surround*: 120 W+120 W (with SS-TS31B)/
Subwoofer*: 120 W (with SA-WSRD1)
* There may be no sound output depending on the source
and the Sound Field setting.
FM/AM tuner section
System: PLL quartz-locked digital synthesizer
system
FM tuner: Tuning range: 87.5-108.0 MHz (50
kHz step)/Aerial type: FM wire aerial/Aerial
terminal: 75 ohms, unbalanced/Intermediate
frequency: 10.7 MHz
AM tuner: Tuning range: 531-1,602 kHz (with
the interval set at 9 kHz)/Aerial type: AM
loop aerial/Intermediate frequency: 450 kHz
/C : 0.7 Vp-p,
B B
107
,continued
GB