Tv And Video Settings - Sony DAR-RD100 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

TV and Video Settings

These settings will adjust items related to the
image, such as size.
Choose the settings according to the type of TV,
tuner, or decoder connected to the recorder.
Select
[Settings] in the Setup Display. To use
the display, see "Using the Setup Displays" (page
74). The default settings are underlined.
Settings
Auto Preset
Channel Settings
Clock
TV Aspect
Display Mode
Line1 Decoder
Progressive Mode
PBC
Factory Setup
[TV Aspect]
Selects the aspect ratio of the connected TV (4:3
standard or wide).
[ 4:3 ]
[ 16:9 ]
[Display Mode]
Selects how to display a wide picture on the screen
when [4:3] is selected in [TV Aspect].
[ Letter
Box ]
[ Pan
Scan ]
78
GB
Sweden
Start
Select this when connecting to a
4:3 screen TV. When you select
[4:3], set [Display Mode] below.
Select this when connecting to a
wide-screen TV or TV with a
wide mode function.
Displays a wide picture with
bands on the upper and lower
portions of the screen.
Automatically displays a wide
picture on the entire screen and
cuts off the portions that do not
fit.
[16:9]
[4:3 Letter Box]
[4:3 Pan Scan]
Note
Depending on the disc, [Letter Box] may be selected
automatically instead of [Pan Scan] or vice versa.
[Line1 Decoder]
Sets the LINE 1-TV jack for inputting encoded
video signals.
[ Off ]
Inputs the signals from the LINE
1-TV jack. Normally select this.
[ On ]
The signal input from the LINE 1-
TV jack is output to the LINE 3/
DECODER jack for decoding.
The decoded signal is then input
back through the LINE 3/
DECODER jack so you can
record or view PAY-TV/Canal
Plus programmes. In this case,
select "LINE 1" by pressing
INPUT SELECT.
[Progressive Mode] (Viewing in Progressive
format)
Selects whether the COMPONENT VIDEO OUT
jacks output progressive signals.
[ Off ]
Select this when your TV is not
compatible with progressive
signals, or, the TV is connected to
jacks other than the
COMPONENT VIDEO OUT
jacks.
[ On ]
Select this when your TV accepts
progressive 625p format signals,
and, the TV is connected to the
COMPONENT VIDEO OUT
jacks. You will enjoy accurate
colour reproduction and high
quality image.

Publicidad

Tabla de contenido
loading

Tabla de contenido