Straight Stitch - JUKI HZL-G220 Manual De Instrucciones

Straight stitch

Attention
22
Pattern No.
Presser foot
Thread tension
Turn OFF the power switch before replacing the presser foot.
Practical 00
Standard presser foot (A)
Auto
Sewing start
Pull the needle and bobbin threads under the presser foot to the rear of the
machine and lower the presser foot to start sewing.
Sewing end
Stop sewing and push the thread trimming button to trim the threads.
G220
<by thread trimming button>
Push the thread trimming button to trim the threads.
G220 G120
<by thread cutter at the face plate cover>
You can also cut the threads by the thread cutter at the face plate cover.