JUKI HZL-G220 Manual De Instrucciones página 31

5
Fabric
(wrong side)
6
Fabric
(wrong side)
Finish line
When changing the needle entry point
1. If the stitches reach too far beyond the folded edge
2. If the stitches fail to reach the folded edge
Position the folded edge against the guide and sew.
Guide
Turn over the fabric after sewing.
Fabric
(right side)
Push the zigzag width
adjusting button "
Push the zigzag width
adjusting button "
Turn the handwheel
to check the
needle entry point.
When adjusting,
make sure the
needle is in the up
position.
".
Turn the handwheel
to check the
needle entry point.
When adjusting,
make sure the
needle is in the up
position.
".
29