N.dual-Post Fixed Height Standard, And Dual-Post Height; Adjustable Armrests; Single-Post Height Adjustable Armrests; Retractable, Swing-Away, And Midline Joystick Mounts - Quickie Pulse Serie Manual De Instrucciones

Q UI C KIE PU LS E
N. DUAL-POST FIXED HEIGHT STANDARD AND DUAL-POST HEIGHT
ADJUSTABLE ARMRESTS (Optional)
The dual-post flip-back armrest can be either a flip-back or removable armrest.
1. Installing Armrest
a. Insert front and rear posts into armrest receivers.
b. Engage levers (A and B) to secure armrest.
2. Flip-back Operation
a. Disengage lever (A) so front post is able to come free.
b. Armrest now has the ability to be flipped back without removal.
3. Removal
a. Disengage levers (A and B) so front and rear posts are able to come free.
b. Armrest can now be easily removed for transferring.
4. Height-Adjustment (option)
a. Release the upper securing lever (C).
b. Set at desired height
c. Return securing lever to locked position.
d. Move armrest up or down to allow armrest to snap into place
O. SINGLE POST HEIGHT-ADJUSTABLE ARMRESTS (Optional)
1. Installation
a. Slide the outer armpost into the receiver mounted to the wheel chair frame.
b. The armrest will automatically lock into place.
2. Height Adjustment
a. Rotate release lever to stop.
b. Slide armrest pad up or down to desired height.
c. Return lever to locked position.
d. Push arm pad until upper armpost locks firmly into place.
3. Removal
a. Press on the release lever and remove the armrest.
4. Replacing Armrest
a. Slide armrest back into receiver.
b. Return release lever to locked position against armpost.
P. RETRACTABLE, SWING-AWAY AND MIDLINE
JOYSTICK MOUNTS
The joystick or Enhanced Display is mounted with a mechanism that allows the joystick to
be locked in a forward or retracted position.
Retractable and Swing-away
a. To retract the joystick, push outward on the inside of joystick.
b. Push the joystick away from the front of the armrest until it locks into the swing-away
position.
c. To return to forward position, push the front of the joystick mount forward until it
locks into place.
Rotate the Midline Mount.
a. Push in on the release button (D) at the end of the joystick arm.
b. The Joystick and midline arm should rotate out of the way.
c. To return to midline position, repeat step1 and rotate the joystick mount back to its
original position until it locks into place.
16
18 19
17
Height-Adjustable Armrest Key
1. Inner Arm Post
2. Receiver
3. Release Lever, Locked Position
4. Armrest Pad
5. Transfer Bar
6. Side Panel
7. Tension Adjustment Set Screw
8. Armrest release lever
9. Receiver Adjustment Bolts
19
VIII. USE AND MAINTENANCE
C
A
B
5
3
7
2
9
16
17
4
1
6
8
18
19
D
119832 Rev. E