Product Overview; Intended Use; Indications; Product Description - Invacare SoftCloud Ace Manual Del Usuario

3 Product Overview

3.1 Intended Use

This pressure redistribution mattress and control unit are
intended to be used in conjunction with an appropriately
sized bed frame.
The mattress can be used safely in static mode for static
pressure redistribution, or in dynamic mode should an
alternating pressure support surface be required.
This product delivers effective pressure redistribution to
users, when the support surface is covered with a cotton,
cotton combination or linen bed sheet, and any one of these
is the only item deployed between the support surface and
the user.

3.1.1 Indications

Suitable for supporting the management of all categories
of pressure ulcers when combined with an individual and
comprehensive pressure ulcer protocol.
Suitable for use in home care, residential, nursing and acute
care settings.
Contraindications
Not suitable for users with unstable spinal cord fractures
and/or cervical traction.
Always consult a physician prior to using this device.

3.2 Product Description

The following components are included within the scope
of delivery:
1630732-B
A
A Mattress System including mattress base, CPR tag,
connector, handle with transport cap attached, top
cover with zip.
B Digital Control Unit
C Carry Bag
D User Manual
Medical Grade Power Cord (not shown)
The control unit provides the air supply to the mattress. It
is controlled via a touch panel. There is a visual and audible
warning when pressure fails or power is interrupted.
The control unit redistributes the pressure by alternately
inflating and deflating cells. This enables a frequent
repositioning of the pressure.
Product Overview
B
D
9