Handling Of Warning Labels - Maruyama MSW1012CE Manual Del Propietário

[15] Fuel valve
Fuel supply from the fuel tank can be stopped at this valve.
[16] Recoil starter handle
The engine can be started by pulling the recoil starter handle.
[17] Thermal relief valve
This pump feature will prevent water temperatures from reaching harmful levels by releasing a small
amount of water. Once the water has drained, the thermal relief valve will reset itself.
Caution
 Do not stop the water jet from the spray gun for no longer than 3 minutes while the engine is
running. Water is circulating in the pump and temperature will rise, and breakdown may occur as a
result. If the water jet is stopped for 3 minutes or longer, be sure to stop the engine.
[18] Oil sensor
The engine will stop automatically when the oil level falls below the safety limit.
3. Handling of
Caution
 Keep the labels free from soiling and mud at all times so that the content of the text is clearly
legible.
 If warning label is damaged, it must be replaced with new one.
 If you replaced the parts warning label attached, be sure to attach a new warning label in the same
location of the new parts.
 The following warning labels are found on this machine. Read the labels carefully and understand the
instructions before commencing work.
Warning Labels
-11-EN