Display Settings - Fronius Symo 10.0-3 208-240 Manual De Instrucciones

Inversores para instalaciones fotovoltaicas acopladas a la red
Ocultar thumbs Ver también para Symo 10.0-3 208-240:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Set date
Setting the date (dd.mm.yyyy or mm/dd/yyyy, depending on the setting under Date dis-
play format)
Time display format
For specifying the format in which the time is displayed
Setting range
Factory setting
Date display format
For specifying the format in which the date is displayed
Setting range
Factory setting
Daylight saving time
Activating/deactivating the automatic adjustment for daylight saving time
IMPORTANT! Only use the automatic daylight savings changeover function when there
are no LAN or WLAN-compatible system components in a Fronius Solar Net ring (e.g.
Fronius Datalogger Web, Fronius Datamanager or Fronius Hybridmanager).
Setting range
Factory setting
IMPORTANT! The time and date must be set correctly for day and year values to be dis-
played properly.

Display Settings

Setting range
Language
Setting the display language
Setting range
Night mode
Night mode controls the Fronius DATCOM and the inverter's display operation at night or
when insufficient DC voltage is available
Setting range
Factory setting
12hrs/24hrs
depends on the country setup
mm/dd/yyyy or dd.mm.yy
depends on the country setup
on/off
on
Language / Night Mode / Contrast / Illumination
English, German, French, Spanish, Italian, Dutch, Czech, Slo-
vakian, Hungarian, Polish, Turkish, Portuguese, Romanian
AUTO / ON / OFF
OFF
39

Publicidad

Tabla de contenido
loading

Tabla de contenido