Setting.the.pressure.point; Adjusting.the.brake.lever.blades; Hc³.-.Adjust.braking.power - Magura MT 7 Manual De Instrucciones

Setting the pressure point
You can see that the pressure point of your brake lever (6 posi-
L
tions) can be adjusted by the rotating dial (BAT)
that do not have the rotating dial position the pressure point auto-
matically!
Danger of accident due to component failure or sudden
brake lock-up.
Before setting the pressure point, make sure that the wear limits

of the brake pads and disc brake rotors have not been reached.
At the right brake lever: clockwise in "Plus" (+) direction.
L
At the left brake lever: counterclockwise in "Plus" (+) direction.
Rotate rotating dial (BAT) in "Plus" (+) direction.
)
Pressure point on the brake lever blade acts at an earlier point.
Ö
Brake lever blade moves closer to the handlebar.
Ö
Adjusting the brake lever blade if required.
)
Adjusting the brake lever blades (reach adjust)
You can adjust the position of the brake lever blade (grip width) of
L
your MAGURA MT as required. This adjustment does not affect the
pressure point of the brake!
Danger of accident due to brake failure.
Make sure that the brake lever blade when tightened is at least

20 mm from the handlebar
4
( )
Screw the adjusting screw/rotating dial
)
Brake lever blade moves closer to or further away from the
Ö
handlebar.
]. Brake levers
[
c1
1
( )
[ ]
c1
[ ].
c3
out (-) or in (+).
5
( )
InstallatIon
HC³ – adjust braking power
At the HC³ brake lever blade you can adjust the braking power
L
(Ratio Adjust) of your MAGURA MT as required – manual force,
lever path, pressure point, controllability.
Danger of accident due to changing the controllability of the braking
power.
Make yourself familiar with the changed braking action of the

MAGURA MT away from road traffic.
Danger of accident due to brake failure.
Make sure that the brake lever blade when tightened is at least

20 mm from the handlebar
4
( )
Rotate adjusting screw in "Plus" (+) direction.
2
( )
)
Indicator moves in "max." direction.
3
Ö ( )
Brake lever path increases.
Ö
Required manual force decreases – with the same braking
Ö
power.
Pressure point on the brake lever blade acts at a later point.
Ö
Pressure point on brake lever blade feels softer.
Ö
Rotate adjusting screw in "Minus" (-) direction.
2
) ( )
Indicator moves in "min." direction.
3
Ö ( )
Brake lever path decreases.
Ö
Required manual force increases – with the same braking power.
Ö
Pressure point on the brake lever blade acts at an earlier point.
Ö
Pressure point on brake lever blade feels harder.
Ö
Adjusting the brake lever blade if required.
)
[ ].
c3
[ ]
c2
[ c2 ]
29