Making An Auxiliary Fence - Bosch GCM18V-08 Instrucciones De Funcionamiento Y Seguridad

2610051914.qxp_GCM18V-08 6/24/19 1:56 PM Page 41
▶ Auxiliary fence

▼ MAKING AN AUxILIARY FENCE:

saw head componenents by performing a dry run.
To fasten from front of fence:
with the saw Off by conducting a simulated
cutting cycle, and observe the projected path of
the saw blade. Keep hands at least six (6) inches
away from the projected path of the saw blade.
Fig. 46
13⁄ 1 6"
2 ¾
Saw Operations
Check for interference
between auxiliary fence and
Be aware of the path of the
saw blade. Make a dry run
5 ⅛"
2"
Fig. 45
To fasten from back of fence:
with the saw Off by conducting a simulated
cutting cycle, and observe the projected path of
the saw blade. Keep hands at least six (6) inches
away from the projected path of the saw blade.
17 ¼"
41
Auxiliary
Fence
Blade
Slot
Flat Head
Machine Screws
Be aware of the path of the
saw blade. Make a dry run
5 ⅛"
13⁄ 1 6"
2"