Table Of Specifi Cations - Gumotex KAJAK TWIST 1 Manual De Usuario

Owner's Manual
• A recreational vessel designed for use on internal waterways with an expected wind strength reaching Grade
4 on the Beaufort Scale inclusive and a determining wave height of up to 0.3 metres inclusive, with occasi-
onal waves up to 0.5 metres of height caused e.g. by vessels passing by.
• The boat has been manufactured in compliance with the EN ISO 6185-1 Standard, Category IIIB.
• Related standards: EN ISO 10087, EN ISO 10240, EN ISO 14945.
Dear Customer,
This manual will help you to easily and safely master your vessel.
It contains a detailed description of the vessel, the supplied or built-in
equipment, its sets as well as information about its control and mainte-
nance. Please read it carefully, thereby getting to know the boat before
actually using it.
If this is your fi rst vessel or you have changed the type of vessel and
do not know this type well, please get acquainted with its maintenance
and control prior to your fi rst individual use of the vessel so that it is safe
and comfortable. Your dealer or the National Yacht Federation or club
will recommend you appropriate training courses or qualifi ed instructors.
Do not pull off until the expected sailing conditions (wind strength and
wave height) are appropriate for the construction category of your vessel
and you and your crew are able to control it in these conditions.
Please store this manual in a safe place and hand it over to the new
owner should you sell the vessel.
1. Table of specifications
(indicative values)
Length (cm)
Width (cm)
Diameter of sidewall cylinders (cm)
Number of air chambers
Approximate dimensions - packed in transportation
bag (cm)
Dimensions - packed in cardboard (cm)
Maximum operational pressure
Weight (kg)
Maximum load (kg)
Maximum number of kayakers
Draught (cm)
Highest anchor above surface (cm)
2. Technical description - see Fig. 1
1. side cylinder
2. bottom
3. PUSH/PUSH valve - enables infl ation/ exhaustion, pre-
ssure regulation and measuring of pressure by a mano-
meter (see Fig. 2)
4. Pressure relief valve
5. Footrest
6. Screw valve for small chambers (seats, leg rests, etc.)
7. Handle
8. Manufacturer's data plate
9. Yellow „WARNING" label
10. Elastic rope net
8
KAYAK TWIST 1, TWIST 2/1
TABLE OF CONTENTS:
1. Table of Specifi cations
2. Technical Description
3. Infl ation Instructions
4. Using the Boat
5. Folding of the Boat
6. Treatment and Storage
7. Guarantee Conditions
8. Boat Repairing
9. Product Disposal Method
10. Packaging Disposal Method
11. Type Parameters Tag
12. Safety Caution
TWIST 1
260
79
21
3 + 2
53 × 35 × 19
57 × 42,5 × 25
0,02 MPa [0,2 Bar/3 PSI]
9
100
1
15
35
11. Footrest and seat anchorage mounts (detail A)
12. Tracking fi n mounting point
13. Infl atable seat with backrest
14. Rest mount on the cylinder (detail B)
15. Seat anchorage point on the fl oor (detail B)
16. Seat anchoring strap (detail B)
17. Plastic clip on the seat (detail B)
EQUIPMENT SUPPLIED WITH THE CANOE:
Transport bag, tracking fi n, tie strap for a packed kayak, sponge
in a mesh bag, operating instructions and warranty certifi cate,
repair kit containing glue, patches, and valve (stem) adaptor.
VERSION 9/2019
GB
page 8
TWIST 2/1
360
83
21
3 + 3
53 × 36 × 20
57 × 42,5 × 25
0,02 MPa [0,2 Bar/3 PSI]
13
180
2
15
35
8
9
9
9
10
10
10
10
10
10
11