Troubleshooting; Symptoms And Solutions - FujiFilm SonoSite PowerPack Manual Para El Usuario

Note: If using the PowerPark, you connect to AC
power by docking the stand.
The PowerPack battery (and system battery if
discharged) charge regardless of whether the
system is running.
Caution: The PowerPack contains battery
technology that requires periodic
recharging to maintain optimal
performance. If left uncharged for
months, the battery performance
may degrade or become
non-functional.
Indicators
The PowerPack indicators show available battery
power. While the battery charges, an indicator
flashes.
1 2
Figure 3 Indicators show available battery power:
1 Up to 1/3
2 1/3 to 2/3
3 At least 2/3

Troubleshooting

Symptoms and solutions

PowerPack doesn't charge If the PowerPack
ceases to charge and its indicators are off, it may
be in a frozen state. Disconnect and then
reconnect the following cords:
• PowerPack DC power cord (Z) from the
system
3
• System AC power cord (K), if present, from
the wall outlet
If the problem persists, contact FUJIFILM
SonoSite Technical Support. (See
SonoSite Technical Support"
Charging takes longer than expected If charging
takes a long time (for example, the charge
indicator is always on), try disconnecting the
PowerPack DC power cord (Z) from the system
and running the system on the system battery
only. If the fully charged system battery
discharges quickly (for example, in a few
minutes), it needs replacing. Contact FUJIFILM
SonoSite Technical Support.
PowerPack User Guide
"FUJIFILM
on page 1.)
3