3 When you have finished moving the stand, lock at least two of the wheels by pushing down on the locking
lever.
Troubleshooting
Issue
Printer does not print.
Stand tips over more easily
than expected.
10
Solution
Check the printer selection on the Connectivity settings page.
For more information, see the SonoSite SII user guide.
Check the cable connections. For more information, see the
SonoSite SII Stand Assembly Instructions.
Ensure that the printer is turned on and set up properly. See the
printer manufacturer's instructions, if necessary.
Lower the pole to lower the ultrasound system.
Avoid placing or hanging heavy objects on the stand. Too much
weight can cause the stand to become less stable.