Troubleshooting
If you have trouble connecting the ultrasound system to the wireless network, see
"Troubleshooting"
on page 7 for suggestions. If the trouble continues, contact FUJIFILM SonoSite.
Table 1: Troubleshooting
Symptom
The ultrasound system does
not connect.
Troubleshooting
Solution
Check the following for information about the network:
Make sure that the following icons appear in the system status area on
the ultrasound system screen:
Wireless
Ultrasound-connected
On the ultrasound system, display the Network Status setup page. The
page displays three lines of general information about the connection and
five additional lines about the wireless connection (if present).
Check to see if the Wireless USB Dongle shows as WI-FI ready on the
Settings/Setup page under USB devices. (Applicable for SonoSite M-Turbo,
SonoSite Edge, SonoSite S Series, SonoSite Edge II and SonoSite SII
ultrasound systems.)
Table 1,
7