Attaching The One-Piece Style Sling To The Patient Lift; Slings Using The Cradle Attachment - Invacare 1023891-K Manual Del Usuario

Patient slings
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

SECTION 5—USING DIVIDED LEG, UNIVERSAL HIGH, EASY-FIT, TOILETING, DRESS TOI-

Attaching the One-Piece Style Sling to the Patient Lift

NOTE: For this procedure, refer to FIGURE 5.4.
1. Place the straps of the sling over hooks of the swivel bar. Match the corresponding colors
on each side of the sling for an even lift of the patient.
When connecting sling to the patient lift, the shortest of the straps MUST be at the
back of patient for support. Using long section will leave little or no support for patient's
back. The loops of the sling are color coded and can be used to place patient in various
positions. The colors make it easy to connect both sides of the sling equally. Make sure
that there is sufficient head support when lifting a patient.
2. Refer to the Lifting the Patient in the Patient Lift Owner's Manual.
NOTE: Invacare Lift Swivel Bars have three hookup points per side. The middle hookup is ONLY used
for slings that have three sets of straps per side or slings that use chains or adjustable straps.
FIGURE 5.4 Attaching Slings to Lift - Slings Using Color Coded Straps

Slings Using the Cradle Attachment

The cradle sling has four straps that attach over pegs on the cradle attachment.
Two Sling Attachment Points on Handle (One Attachment Point Not Shown)
Sling Attachment Point
FIGURE 5.5 Attaching Slings to Lift - Slings Using the Cradle Attachment
Part No 1023891-K
LETING HIGH AND CRADLE ONE-PIECE STYLE SLINGS
CAUTION
Color Coded
Straps
17
Patient in Reclined Position
(head and leg strap lengths equal)
Handle
Cradle Attachment
Sling Attachment Point
Patient Slings

Publicidad

Tabla de contenido
loading

Tabla de contenido