Resetting The Appliance; Testing Of The Appliance; Replacing Parts - Angelo Po 1G0FR4ED Manual De Uso

RESETTING THE APPLIANCE

If the safety thermostat is tripped, the appliance has
to be restored to working conditions as follows.
1 - Allow the oil to cool to 30-40°C.
2 - Press the button (A) of the safety thermostat to
restore the electricity supply.

TESTING OF THE APPLIANCE

Important
Before it is put into service, the system
must be tested to check the operating
conditions of every single component
and identify any malfunctions. In this
stage, it is important to check that all
health and safety requirements have been
complied with in full.
To test the system, make the following checks:
)4
The appliance's main functions do not require any
'"
special adjustments by specialist staff except the
$%
&2
The appliance does not require the replacement of
operating components by specialist staff except the
%3
DECOMMISSIONING THE APPLIANCE
Important
This operation must be carried out by skilled
operatives in compliance with the legal re-
quirements with regard to safety at work.
Never dump non-biodegradable materials,
%NGLISH
ADJUSTMENTS

REPLACING PARTS

- 14 -
A
A
1 - check that the mains voltage is the same as that
of the appliance;
2 - operate the appliance's circuit-breaker to check
the electrical connection;
3 - check that the safety device is operating cor-
rectly.
After testing, if necessary instruct the user in all the
skills necessary for putting the appliance into oper-
ation in conditions of safety, in accordance with le-
gal requirements.
settings made during use by the user.
replacement of standard parts which can be carried
out by the user.
lubricating oils and non-metallic compo-
nents (rubber, PVC, resins, etc.) in the envi-
ronment. Dispose of them in accordance
with the relevant legal requirements.
IDM-39604006900.tif
8
9