Caution - warning
Do not dump oil in the environment; dispose
of it in accordance with the laws in force in
the country of use.
RESETTING THE APPLIANCE
If the safety thermostat is tripped, the appliance has
to be restored to the initial working conditions as fol-
lows.
1 - Allow the oil to cool to 30-40°C.
2 - Open the hatch (A).
3 - Press the button (B) of the safety thermostat
tripped to restore the gas supply.
Important
To identify the thermostat that has been
tripped, check which burner has cut out
and press the corresponding button.
4 - Close the hatch (A).
LENGTHY DOWNTIMES OF APPLIANCE
If the appliance is to be out of use for a lengthy pe-
riod, proceed as follows.
1 - Turn off the gas supply tap.
2 - Clean the appliance and the surrounding areas
thoroughly.
INSTRUCTIONS AND WARNINGS FOR USE
To ensure correct use of the appliance, the follow-
ing rules should be adopted.
– Use only the accessories recommended by the
manufacturer.
– Use the baskets as appropriate.
– Before filling the well, check that the drain tap (A)
is turned off.
– Check that the oil level never drops underneath
the minimum level marked (B).
– Use single-seed oils or blends of oils specially
recommended for fryers.
– Melt solid fats in a separate container to avoid
damaging the appliance.
3 - Spread a film of edible oil over the stainless
steel surfaces.
4 - Carry out all the servicing procedures.
5 - Leave the appliance uncovered and the cook-
ing chambers open.
A
- 13 -
B
A
B
A
IDM-39619100500.tif
IDM-39603311000.tif
IT
GB
DE
FR
ES
B
English