Combination Possibilities; Intended Use; Environmental Conditions - Ottobock 1D35 DynamicMotion Instrucciones De Uso

1.1 Construction and Function
The prosthetic foot 1D35 Dynamic Motion is delivered with an integrated
modular adapter made of aluminium.
The functional properties of the prosthetic foot are achieved through the
spring element made of plastic and functional foam elements. The prosthetic
foot permits perceptible plantar flexion at heel strike and a natural rollover
movement. Stored energy is released by the spring element.

1.2 Combination possibilities

This prosthetic component is compatible with Ottobock's system of modular
connectors. Functionality with components of other manufacturers that have
compatible modular connectors has not been tested.

2 Intended use

2.1 Indications for use
The product is to be used solely for lower limb prosthetic fittings.
2.2 Area of application
Our components perform optimally when paired with appropriate compon­
ents based upon weight and mobility grades identifiable by our MOBIS clas­
sification information and which have appropriate modular connectors.
The product is recommended for mobility grade 2 (restricted
outdoor walker) and mobility grade 3 (unrestricted outdoor walk­
m°
kg
er).
Size [cm]
Max. body weight [kg]

2.3 Environmental conditions

Allowable environmental conditions
Temperature range for use: -10 °C to +60°C
Allowable relative humidity 0 % to 90 %, non-condensing
Unallowable environmental conditions
Mechanical vibrations or impacts
Perspiration, urine, fresh water, salt water, acids
Dust, sand, highly hygroscopic particles (e.g. talcum)
10
22 to 25
75
26 to 30
100